The following is the installation guide and product features of the 42″ DC Motor Telescopic LED Ceiling Fan, which is suitable for reference for the installation master.
- Product Features
🌬️ 1. DC Motor (DC Motor)
Energy saving: energy saving than the traditional AC motor by about 30% – 60%
Silent operation: low noise, suitable for bedrooms, study, and living room
Smooth operation: small vibration, long service life
💡 2. Integration of LED lighting
Built-in high-brightness LED light board
Common support:
Three-color light (warm light/neutral light/white light)
Endless dimming (depending on model)
Long service life, low heat, energy saving, and environmental protection
📏 3. Telescopic (Telescopic Downrod)
The length of the boom is optional or adjustable
Suitable for different heights (apartment/townhouse/villa)
Improve the circulation effect
🌀 4. 42-inch fan blades
Suitable for small and medium spaces (about 10-20 ㎡)
The wind feels soft and even, not straight
🎮 5. Intelligent control (depending on model)
The remote control
Multi-speed wind speed adjustment
Time on and off
Forward and reverse function (summer/winter mode)
🏡 6. Modern and simple design
Suitable for modern, Nordic, minimalist, light luxury style
Common color: White/black/wood grain
- Installation Guide
⚠️ Precautions before installation
Please be sure to cut off the power before installation
It is recommended to install it by a professional electrician or experienced personnel
Confirm that the ceiling can bear ≥ 25kg
🧰 Tools required
Cross screwdriver
Electric drill (if drilling is required)
Insulating tape
Ladder
🛠 Installation Steps
1️⃣ installation of Ceiling Bracket
Attach the hanger to a solid ceiling structure (concrete or keel)
Using anchors or forming a complete set screw firmly
2️⃣ Connect the telescopic boom
Run the power cord through the boom
Connect the boom with the motor body and tighten the safety screw
Ensure that the anti-out-of-stock installation is in place
3️⃣ Lift the fan body
Hang the boom in the hanger
Make sure it is firmly stuck to prevent shaking
4️⃣ Wire connection
Wiring according to color:
Fire line (L) → brown/red
The zero line (N) goes to blue
Ground line (E) → yellow and green double color
After connecting, wrap it with insulating tape
5️ Install the fan blades
Install the fan blades in the order of their numbers
Tighten the screws to ensure balance
6️ ️ Install the LED light assembly
Connect the light wire plug
Fixed lamp board
Install the lampshade
7️ ️ power-on test
Turn on the power.
Test the wind speed, lighting, and remote control functions
Confirm that there is no abnormal vibration or noise
- Check after installation
✅ Whether the fan operates smoothly
✅ whether the lights switch properly
✅ Is the remote control fully functional
✅ whether the suspension rods and fan blades are firm - Suggestions for Applicable Scenarios
Bedroom
Small living room
Study Room
Apartment unit
Restaurant area