This 48-inch smart white wooden ceiling fan with light features a minimalist modern design, perfectly blending natural wood blades with a pure white body. It is both beautiful and practical, suitable for various home spaces such as living rooms, bedrooms, and dining rooms.
Next, we will introduce the installation tutorial and precautions for this ceiling fan:
I. Preparation Before Installation
- Installation Requirements
The ceiling must be a concrete or solid wood load-bearing structure.
The ceiling must be able to bear a load of ≥ 25kg.
Recommended installation height:
Fan blades should be ≥ 2.3 meters from the ground.
Fan blades should be ≥ 30cm from the ceiling. - Tools Required
Phillips screwdriver
Electric drill (required for concrete ceilings)
Expansion screws (if not pre-embedded)
Insulating tape
Ladder - Pre-installation Check
Confirm that all product accessories are complete.
Check that the fan blades, motor, and lampshade are free from transportation damage.
Be sure to cut off the power before installation.
II. Installation Steps
Step 1: Install the Mounting Bracket
Locate the reserved power outlet on the ceiling.
Attach the mounting bracket tightly to the ceiling.
Securely fix it with expansion screws or self-tapping screws.
Ensure the mounting bracket is level, stable, and does not wobble.
Step 2: Install the Downrod
Select a downrod of appropriate length (5″ / 10″ / 24″).
Thread the power cord through the inside of the downrod.
Connect the downrod to the motor and tighten the fixing screws.
Insert the safety pin to prevent loosening.
Step 3: Connect the Power Wires
Connect the wires according to the colors:
Live wire (L) → Live wire
Neutral wire (N) → Neutral wire
Ground wire (yellow-green wire) → Grounding
Wrap securely with wire connectors or insulating tape.
Ensure there are no exposed copper wires.
Step 4: Install the Motor Assembly
Hang the motor assembly onto the mounting bracket hook.
Arrange the wires to avoid pinching.
Tighten the decorative cover to conceal the mounting bracket and wires.
Step 5: Install the Fan Blades
Attach the three fan blades to the motor blade holder one by one.
Ensure that the screws on each fan blade are tightened.
Maintain a consistent installation angle for the fan blades.
Step 6: Install the LED Light Assembly
Connect the light wire plug.
Fix the LED light panel to the bottom of the motor.
Install the lampshade and tighten it.
Step 7: Power-on Test
Restore power.
Test the fan’s various speed settings.
Test forward rotation / reverse rotation. Reverse Function
Testing of three-color LED light switching
Confirm smooth operation and no abnormal noise
III. Precautions for Use
Installation and Safety
Must be operated by personnel with electrical experience or professional installers.
Strictly prohibited from installation on unstable ceilings or ceilings where plasterboard alone bears the load.
After installation, re-check that all screws are tightened.
Usage Precautions
Do not touch the fan blades during operation.
Do not hang heavy objects on the fan or light fixture.
Children should use under adult supervision.
Maintenance
Always disconnect the power before cleaning.
Clean with a dry cloth or a slightly damp soft cloth.
Do not use corrosive cleaning agents.
Regularly check for loose screws.
Other Reminders
If abnormal vibration, noise, or odor occurs, immediately disconnect the power and contact after-sales service.
It is recommended to turn off the power when not in use for a long time.
Product Specifications
Fan Size: 48 inches
Color: White body + wood grain blades
Lighting Type: LED three-color dimming
Airflow Mode: Forward / Reverse
Applicable Scenarios
Suitable for modern minimalist, Nordic, and wood-style home decoration styles, creating a comfortable, natural, and intelligent living environment.